Saturday, September 21, 2013

Sunforce 50048 60W Solar Charging Kit

Sunforce 50048 60W Solar Charging Kit
Sunforce 50048 60W Solar Charging Kit was listed on Amazon for $599.99, selling for $228.93 USD brand new. Manufactured by Sunforce. There are 3 units left brand new.Some great features of this product include:
  • Amorphous solar charging kit provides up to 60 watts of clean, free, renewable power
  • Designed for RVs, cabins, homes, boats, back-up and remote power use
  • Weatherproof, durable solar panels can withstand impacts from hailstones travelling 50 miles-per-hour
  • Built-in blocking diode helps protect against battery discharge at night
  • Complete kit includes four 15W amorphous solar panels, a PVC mounting frame, a 7-amp charge controller, 200-watt inverter, and wiriThe Sunforce 60-Watt Solar Charging Kit gives you several more reasons to love the sun. Perfect for cabins, recreational vehicles, remote power, back-up power, 12V battery charging and more, this kit comes with everything you need to start producing up to 60 watts/4 amps of clean, free power in all The Sunforce 50048 60-Watt Solar Charging Kit gives you several more reasons to love the sun. It provides the power you need, while helping you save money and protect the environment. This kit is ideal for cabins, recreational vehicles, remote power, back-up power, and 12-volt battery charging. It c
    Sunforce 50048 60W Solar Charging Kit
    Buy Now on Amazon.com
    Buy for $228.93 brand new

    Save 62% ($371.06) by purchasing on Amazon.com

3 comments:

  1. HMMWV "God, Country, Corps"November 13, 2013 at 7:53 PM


    *Update* 6-2010, while my original panels are still running strong so long as I hose them down once a month, I've noticed that the PVC pipe provided to hold them in place has become brittle with sun exposure, hence I would now in 20/20 hindsight recommend a coat of on the PVC parts to prevent UV cracking later in life. I do not think the Krylon Fusion product was available when I first setup my first panels but UV cracking of the support structure could cause panel damage in years 2 and 3.

    Meanwhile Amazon got their hands on some obsolete & discontinued Sharp panels (12.5% efficiency vs the new 13.1% efficiency) - if you are serious about needing lots of solar power in a small space, this is a big kit - you can view it here:...

    ReplyDelete

  2. The panels are installed on my garage roof, wired in to a battery bank and inverter which primarily functions as a very large (4KW) uninterruptible power supply for the house. So far, everything is working fine. They keep the batteries topped off without using power from the grid.
    Like most manufacturer's specs, the 60 watt claim is hard to realize. The panels' current output is about 3.2 amps under bright sun, which yields only about 45 watts into a 12 volt gel cell battery at 14.2 volts. The panels can output about 20 volts which would indeed yield 60 watts, but not while connected with the included charge controller. A MPPT controller would achieve 60 watts, however.
    The included controller is acceptable in that it works as advertised. One good thing about it is that it does not shunt the panels when the battery is charged, it actually opens the circuit, which means the excess panel output would be available for other uses. I intend to build another device for...

    ReplyDelete

  3. I purchased two of these kits (8 panels) and mounted them on the top of my RV. I have had them on the top of my RV now for approximately 8 months.

    When I received the units, I tested each of them for the open voltage measurement noted in the instructions with a digital meter and found each to be producing 21 volts unloaded. Encouraged that the panels were working properly, I went ahead and took the time and expense to mount them to the top of my RV.

    After 8 months, here's what I found:

    First of all, the 15 watt, 1 amp peak output rating that Sunforce advertises is not correct. The peak output rating for each of these panels should have been advertised at approximately 750 milliamps per panel. The total peak output that one could typically expect from the 4 panels in this kit would be around 3 amps. 3 amps under perfect conditions.

    I have noticed that the boards are extremely prone to large drops (upwards of 45%) in current output when...

    ReplyDelete